Siemens PSFR-CP41 - Manual (Page 24)

U42093-J-Z716-1-74 Operating Manual
Installing the PSFR-CP41 Mounting the PSFR-CP41 in a Rack
To connect the PSFR-CP41 to the SCSI bus:
1. Power off your SCSI devices.
2. Connect a SCSI cable to one of the SCSI connectors on the back of the
router. If necessary, use a narrow-to-wide adapter.
3. Connect the other end of the SCSI cable to the next SCSI device on the bus.
4. If the PSFR-CP41 is at the end of the SCSI bus, place the terminator
provided with the router on the PSFR-CP41’s other SCSI connector. If the
router is not at the end of the bus, attach a second SCSI cable to the other
SCSI connector. Use a narrow-to-wide adapter, if necessary. Connect this
cable to the next device on the bus.
PSFR-CP41 SCSI connection
I
0
S CS I Connectors