Siemens PSFR-CP41 - Manual (Page 54)

U42093-J-Z716-1-74 Operating Manual
Configuring the PSFR-CP41 SNMP Configuration
SNMP Configuration
The SNMP Configuration menu allows for various SNMP options to be
configured. This includes Trap manager IP address, community names, and
Trap priority.
Toggle Trap
SNMP Trap Enable allows Trap reporting to be turned on and off. If SNMP Traps
are disabled, no Trap events are sent.
Press 3) to enable Trap events.
SNMP Configuration
Version: X.X
XXXX
Current SNMP Configuration:
Community Name for GET: pub
Community Name for SET: priv
Manager IP Address for Traps: 1.1.1.1
Traps are enabled for events of any priority
1) Change Community Name for GET
2) Change Community Name for SET
3) Toggle Trap
4) Change Manager IP Address for Traps
5) Decrease Trap Priority
6) Increase Trap Priority
X) Return to previous menu
SNMP Configuration
Version: X.X
XXXX
Current SNMP Configuration:
Community Name for GET: pub
Community Name for SET: priv
Traps are disabled
1) Change Community Name for GET
2) Change Community Name for SET
3) Toggle Trap
X) Return to previous menu