Siemens PSFR-CP41 - Manual (Page 42)

U42093-J-Z716-1-74 Operating Manual
Configuring the PSFR-CP41 Communicating with the PSFR-CP41
Communicating with the PSFR-CP41
The PSFR-CP41 is designed to function directly out of the shipping container
with no special configuration required. However, you have the ability to monitor
various aspects of the PSFR-CP41’s performance by connecting a terminal or
terminal emulator to the serial port on the rear of the router.
The PSFR-CP41 is designed to communicate with any operating system that
utilizes a terminal emulator. For example, you can use Hyperterminal on
Windows NT 4.0. If your computer uses another operating system, be sure the
baud rate, data bits, stop bits, parity, and terminal emulation are set as specified
in the following Table.
Connection properties
*
For more information on the Autobaud feature, see Chapter “Installing the
PSFR-CP41”.
Type Setting
Baud rate
*
9600, 19200, 38400, 57600, or 115200
Date bits 8
Parity None
Stop bits 1
Flow control None