Siemens PSFR-CP41 - Manual (Page 14)

U42093-J-Z716-1-74 Operating Manual
Installing the PSFR-CP41
This chapter describes how to setup and install the PSFR-CP41. This includes
unpacking the PSFR-CP41 for the first time, factors to consider when installing
the PSFR-CP41, either desktop or rack installation instructions, and connecting
to different types of devices. Read this chapter carefully and completely before
working with the PSFR-CP41.
A number of factors need to be considered in planning the installation of the
PSFR-CP41. These factors include the location of the unit, the use of the unit,
and the type of devices to which the unit will be attached.
Location
The PSFR-CP41 Router can be placed on a desktop or mounted in a standard
19-inch rack depending on the specific requirements of the installation. The
operating environment should meet the requirements found in Chapter 1. If you
plan to use the router on a tabletop, attach the stick-on feet to the bottom of the
router to protect the surface.
The PSFR-CP41 contains a cooling fan mounted in the rear of the
enclosure and intake vents on the front of the enclosure. The rear fan
vent and the front intake vents should remain clear of obstructions to
ensure proper airflow.
Unpacking the Box
1. Remove all items from the shipping container. Check each one for damage.
Keep the PSFR-CP41 in the protective bag until you are ready to install it.
2. Refer to the packing slip or contents list to make sure you received all the
equipment you ordered. If an item is missing, contact your sales represen-
tative immediately.
3. Select a location that ensures the front intake vents and rear fan are clear of
obstructions so air flows freely through the router.
4. Do not connect any devices or cables to the PSFR-CP41 until the device is
secured in a rack or placed securely on a flat, level surface.
i