Siemens PSFR-CP41 - Manual (Page 26)

U42093-J-Z716-1-74 Operating Manual
Installing the PSFR-CP41 Mounting the PSFR-CP41 in a Rack
PSFR-CP41 Ethernet port
Serial Port Connection
The RJ11 connector on the rear panel of the PSFR-CP41 provides an RS-232
connection that can be used to configure the PSFR-CP41, monitor diagnostic
status, or to update the program stored in the PSFR-CP41’s Flash memory. A
cable is provided with the unit to connect to a DB-9 serial connection. Further
information on the operations allowed via the RS-232 port is provided in
Chapter “Configuring the PSFR-CP41”.
The RS-232 port operates with the following settings:
Baud Rate: Autobaud (9600, 19200, 38400, 57600, or 115200)
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: None
I
0
Ethernet port