Star Micronics Dot Impact Printer - Manual (Page 75)

3-67 STAR Command Specifications
Rev. 0.70
3-3-15 Others
RS
[Name] Ring buzzer
[Code]
ASCII RS
Hexadecimal 1E
Decimal 30
[Defined Area] ---
[Initial Value] ---
[Function] Issues a short buzzer sound from the printer.
CAN
[Name] Cancel print data and initialize commands
[Code] ASCII CAN
Hexadecimal 18
Decimal 24
[Defined Area] ---
[Initial Value] ---
[Function] When the reception buffer and line buffer are cleared, the set commands are initialized.
Immediately executed not when taking out from the reception buffer, but when received from the host.
DIPSW and memory switch re-read is not performed.
The following shows the specifications that are not initialized by this command.
• DC1 and DC3 select/deselect status
• ESC BEL external device drive conditions
• Auto status valid/invalid conditions