Star Micronics Dot Impact Printer - Manual (Page 72)

3-64 STAR Command Specifications
Rev. 0.70
ESC x 1
[Name] Specify two byte Kanji characters (cancel expanded Kanji characters)
[Code] ASCII ESC x 1 Or ESC x “1”
Hexadecimal 1B 78 01 1B 78 31
Decimal 27 120 1 27 120 49
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Cancels specify Chinese character expansion, and sets to two-byte Kanji characters
When 16 x 16 dot Kanji characters [single density] are selected, they become two-pass characters (state (C)
to state (A))
When 16 x 16 dot Kanji characters [double density] are selected, they become four-pass characters (state (D)
to state (B))
See “Relationship of Kanji Character Size Selection.”
ESC x 0
[Name] Specify expanded Kanji characters (Double high/double high & wide)
[Code] ASCII ESC x 0 Or ESC x “0”
Hexadecimal 1B 78 00 1B 78 30
Decimal 27 120 0 27 120 48
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Sets Chinese character expansion.
When 16 x 16 dot Kanji characters [double density] are selected, they become two-pass characters (double-
tall size: state (A) to state (C))
When 16 x 16 dot Kanji characters [double density] are selected, they become horizontally and vertically
expanded characters (double high & wide size: state (B) to state (D))
See “Relationship of Kanji Character Size Selection.”