Star Micronics Dot Impact Printer - Manual (Page 28)

3-20 STAR Command Specifications
Rev. 0.70
ESC A n
[Name] Define n/72 inch pitch line feed
[Code]
ASCII ESC A n
Hexadecimal 1B 41 n
Decimal 27 65 n
[Defined Area] 0 ≤ n ≤ 85
[Initial Value] n = 12 (1/6 inch line feed)
[Function] Defines line feed amount for one line as n/72 inch.
To enable this code, ESC 2 (line feed pitch setting) must be sent.
ESC 2
[Name] Set ESC A line feed pitch
[Code] ASCII ESC 2
Hexadecimal 1B 32
Decimal 27 50
[Defined Area] ---
[Initial Value] ---
[Function] Sets one line feed amount to the value defined by ESC A (n/72 inch pitch line feed definition).
Line feed amount is set to 1/6 inch if executing this command when ESC A (n/72 inch pitch line feed
definition) is not set.