Star Micronics Dot Impact Printer - Manual (Page 58)

3-50 STAR Command Specifications
Rev. 0.70
BEL
[Name] External device 1 drive instruction
[Code] ASCII BEL
Hexadecimal 07
Decimal 7
[Defined Area] ---
[Initial Value] ---
[Function] Executes the external device drive conditions set according to the ESC BEL (external device drive pulse
width setting command).
As with other commands, this command temporarily stores data in the data buffer, then executes in the order
received.
Note External device 1 and external device 2 cannot be executed simultaneously.
FS
[Name] External device 1 drive instruction (real time)
[Code] ASCII FS
Hexadecimal 1C
Decimal 28
[Defined Area] ---
[Initial Value] ---
[Function] Executes the external device drive conditions set according to the ESC BEL (external device drive pulse
width setting command).
The printer executes this command immediately upon reception.
Note External device 1 and external device 2 cannot be executed simultaneously.