Star Micronics Dot Impact Printer - Manual (Page 23)

3-15 STAR Command Specifications
Rev. 0.70
SI
[Name] Select upside-down printing
[Code]
ASCII SI
Hexadecimal 0F
Decimal 15
[Defined Area] ---
[Initial Value] Upside-down printing cancelled
[Function] Specifies upside-down printing
This command is enabled only when at the top of the line.Therefore, upside down and right-side up
characters cannot both exist in the same line.
This command is enabled for following.
• ANK characters
• Kanji characters
• Bit images
DC2
[Name] Cancel upside-down printing
[Code]
ASCII DC2
Hexadecimal 12
Decimal 18
[Defined Area] ---
[Initial Value] Upside-down printing cancelled
[Function] Cancels upside-down printing
This command is enabled only when at the top of the line.