Star Micronics Dot Impact Printer - Manual (Page 73)

3-65 STAR Command Specifications
Rev. 0.70
ESC w 1
[Name] Specify two-byte 16 x 16 dot Kanji characters [Single Density] (Default)
[Code] ASCII ESC w 1 Or ESC w “1”
Hexadecimal 1B 77 01 1B 77 31
Decimal 27 119 1 27 119 49
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Cancels specify Japanese character expansion, and sets to two-byte 16 x 16 dot Kanji characters [single
density]
Kanji characters become two-pass characters ( to state (A))
When the power is turned off, this is set.
See “Relationship of Kanji Character Size Selection.”
ESC w 0
[Name] Specify double high & wide Kanji characters
[Code] ASCII ESC w 0 Or ESC w “0”
Hexadecimal 1B 77 00 1B 77 30
Decimal 27 119 0 27 119 48
[Defined Area] ---
[Initial Value] Specify two-byte 16 x 16 dot (single density) Kanji characters.
[Function] Sets double high & wide (double-wide/double-high) 16 x 16 Kanji characters. (to state (D))
See “Relationship of Kanji Character Size Selection.”