Star Micronics Dot Impact Printer - Manual (Page 103)

6-3 STAR Command Specifications
Rev. 0.70
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
Others RS ○ ○ ○ ○ ○
CAN ○ ○ ○ ○ ○
DC3 ○ ○ ○ ○ ○
DC1 ○ ○ ○ ○ ○
ESC @ ○ ○ ○ ○ ○
ESC U ○ ○ ○ ○ ○
ESC GS # - - ○ ○ ○
ESC # ○ ○ Ignored Ignored Ignored
ESC ? ○ ○ ○ ○ ○
• Black Mark Related Commands
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
Black mark
Related
Commands ESC d (Note 3) - - ○ ○ ○
FF (Note 3) - - ○ ○ ○
ESC FF - - ○ ○ ○
ESC GS ( F - - ○ ○ ○
ESC RS m - - - ○ ○
• USB Related Commands
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
USB
Related
Commands
• 2-Color Printing Related Commands
Class Commands
Model Name
BD100 SP2000 BD500 SP500 SP700
2-Color Printing
Related
Commands
ESC RS C - - - - ○
ESC 4 - - - - ○
ESC 5 - - - - ○
(Note 1) Kanji characters
• Δ: Enabled only on printer models equipped with Kanji characters.
• Japanese character control commands are ignored on models not installed with Japa-
nese character fonts.
• Japanese character control commands are ignored if the specification for the location of
use is specified as SBCS (single byte countries) by the memory switch.
(Note 2)
Red/black substitute function can be selected by the memory switch. Refer to each print-
er’s specification manual.
Red/black substitute function can be selected by the command ESC GS 4.
(Note 3)
These are commands whose operation specifications vary when the black mark function
is enabled.
(Note 9)
Ignored command when using Ethernet or wireless LAN.