Star Micronics Dot Impact Printer - Manual (Page 25)

3-17 STAR Command Specifications
Rev. 0.70
3-3-4 Line Spacing
LF
[Name] Line feed
[Code]
ASCII LF
Hexadecimal 0A
Decimal 10
[Defined Area] ---
[Initial Value] Set line feed to 1/6 inch
[Function] After printing data in the line buffer, paper is fed according to the currently set line feed amount.
CR
[Name] Carriage return (Print line feed)
[Code]
ASCII CR
Hexadecimal 0D
Decimal 13
[Defined Area] ---
[Initial Value] Set line feed to 1/6 inch
[Function] Specifies the function according to the memory switch value.
Memory SW Function
Condition (1) Ignored
Condition (2) Same as the code.
Condition (3) Executes only printing, with no paper feed.
See each printer’s product specifications manual for details on the memory switch settings.