SMC Networks ARM PL241 - Manual (Page 86)

Programmer’s Model for Test
4-2 Copyright © 2006 ARM Limited. All rights reserved. ARM DDI 0389B
4.1 SMC integration test registers
Test registers are provided for integration testing.
Figure 4-1 shows the SMC integration test register map.
Figure 4-1 SMC integration test register map
Table 4-1 lists the SMC integration test registers.
4.1.1 SMC Integration Configuration Register at 0x1E00
The read/write smc_int_cfg Register selects the integration test registers. This register
is only for test. This register cannot be read or written to in the Reset state.
Figure 4-2 shows the register bit assignments.
Figure 4-2 smc_int_cfg Register bit assignments
VPFBLQWBRXWSXWV
VPFBLQWBLQSXWV
VPFBLQWBFIJ
[(
[(
[(
Table 4-1 SMC test register summary
Name
Base
offset
Type
Reset
value
Description
smc_int_cfg 0x1E00 R/W 0x0 SMC Integration Configuration Register at 0x1E00
smc_int_inputs 0x1E04 RO - Integration Inputs Register at 0x1E04 on page 4-3
smc_int_outputs 0x1E08 WO - Integration Outputs Register at 0x1E08 on page 4-4
LQWBWHVWBHQ
8QGHILQHG