Juniper Networks SSG 20 - Manual (Page 79)

„ 79
Figure 39: Eth0/0 Interface Window
Table 24: Fields in Eth0/0 Interface Window
11. Eth0/1 Interface (DMZ Zone) Window
The eth0/1 interface can have a static or a dynamic IP address assigned via DHCP.
Field Description
Dynamic IP via DHCP Enables the device to receive an IP address for the Untrust zone
interface from a service provider.
Dynamic IP via PPPoE Enables the device to act as a PPPoE client, receiving an IP address
for the Untrust zone interface from a service provider. Enter the
username and password assigned by the service provider.
Static IP Assigns a unique and fixed IP address to the Untrust zone interface.
Enter the Untrust zone interface IP address, netmask, and gateway
address.