Juniper Networks SSG 20 User Manual

Page 66

Text mode
Original mode

SSG 20 Hardware Installation and Configuration Guide

5. ADSL2/2+ Interface Window

If you have the ADSL2/2+ mini PIM installed in your device, you can configure the
adslx/0 interface using the following window.

Figure 28: ADSL Interface Configuration Window

NOTE:

If you have two ADSL2/2+ mini-PIMs installed on your device, you cannot
configure the Multi-link feature with the ICW. To configure ML ADSL, refer to the
Concepts & Examples ScreenOS Reference Guide.