Juniper Networks SSG 20 - Manual (Page 63)

„ 63
Appendix B
Initial Configuration Wizard
This appendix provides detailed information about the Initial Configuration Wizard
(ICW) for an SSG 20 device.
After you have physically connected your device to the network, you can use the
ICW to configure the interfaces that are installed on your device.
This section describes the following ICW windows:
„ Rapid Deployment Window on page 64
„ Administrator Login Window on page 64
„ WLAN Access Point Window on page 65
„ Physical Interface Window on page 65
„ ADSL2/2+ Interface Window on page 66
„ T1 Interface Windows on page 68
„ E1 Interface Windows on page 73
„ ISDN Interface Windows on page 75
„ V.92 Modem Interface Window on page 78
„ Eth0/0 Interface (Untrust Zone) Window on page 78
„ Eth0/1 Interface (DMZ Zone) Window on page 79
„ Bgroup0 Interface (Trust Zone) Window on page 80
„ Wireless0/0 Interface (Trust Zone) Window on page 81
„ Interface Summary Window on page 82
„ Physical Ethernet DHCP Interface Window on page 83
„ Wireless DHCP Interface Window on page 83
„ Confirmation Window on page 84