Name and function of parts – JVC VN-C205 User Manual
Page 9
9
Camera
Name and Function of Parts
1
Safety cable mounting hole
This hole is mounted to the ceiling slab or
channel. (Safety cable not included.)
Caution
To avoid unforeseen accidents, attach the
safety cable. Otherwise, there is nothing to
prevent the camera from falling should it
come loose.
2
Mounting holes
These holes are used to mount the camera
body to the ceiling. When using a 4 inch
square electrical box, the 2 holes diagonally
across are used to fix the box in place.
3
Dome Cover
The dome cover is fragile. Take care when
handling it.
4
Plate for depressing cables
5
Cable extraction hole
This hole is used to extract cables from the
side of the camera without opening holes in
the ceiling.
6
Input Power cable
To input DC 12 V or AC 24 V power.
The AC 24 V power supply should conform
to the following : Class 2 only (For USA), Iso-
lated power supply only (For Europe).
7
Video signal output connector (BNC)
This BNC connector outputs a composite
video signal. Connect this to the video input
connector of a video monitor, switcher, etc.
Output is restricted signal in the NTSC for-
mat only.
2
3
1
7
6
4
5
C205_p2-26
05.7.4, 0:57 PM
9