JVC VN-C205 - Manual (Page 45)

45
2-4 Other Settings Using the "VN-C205U Setup Tool" (5. Recording Setting)
● When an alarm is activated, recording can be performed via "local recording", where camera
images are saved into a CF card, or via the V.Networks Controller, where these are saved into the
hard disk of the PC. (
☞
Page 67)
This function is used to perform settings for local recording, which records camera images to
the CF card when the alarm is activated. Please purchase the CF card separately. (
☞
Page 19)
● Setting the [Trigger Recording] screen
1.
Start up the "VN-C205U Setup Tool" and select [Recording]. To make new values
effective, click on [Apply], followed by [OK].
1
Select alarm input signal “Trigger” for starting local
recording.
C205_p27-45 05.6.28, 11:46 AM 45