Step 3 setting using the v.networks controller, 1 starting up v.networks controller, 1 starting up the v.networks controller – JVC VN-C205 User Manual

Page 56

Text mode
Original mode

3-1 Starting Up V.Networks Controller

Settings (Step 3 Setting Using the V.Networks Controller)

The installed "V.Networks Controller" can be used to monitor camera images.
In addition, recording/playback operations and setting of frame rate for camera
images are also possible.

Select [Start] † [Programs] † [V. NETWORKS] †

[V.Networks Controller] to

start up the "V.Networks Controller".

Live images from the camera will be
displayed.

Select the camera to connect to from the
pull-down menu for the camera.

Notes

● Enter the correct password if a password has been set.
● This controller can be connected to VN-C1, VN-C2, VN-C3, VN-C30 (JPEG only), VN-A1,

VN-C10 (JPEG and MPEG), VN-C655 and VN-C625 as well VN-C205.

C205_p56-p65

05.6.27, 11:26 AM