JVC VN-C205 - Manual (Page 81)

81
Ⅵ Alarm In
For specifying the camera operation upon
input of alarm signals.
1
IN1/IN2
On : Detect Mode
(Set value: Make, Break, Toggle)
: Alarm Out
(Set value: Not Available, OUT1, OUT2)
: Message Packet
(Set value: Available, Not Available)
: FTP
(Set value: Available, Not Available)
: Shutdown
(Set value: Available, Not Available)
Off : Do not use Alarm 1 and Alarm 2.
2 Relay Alarm
On : Alarm Out
(Set value: Not Available, OUT1, OUT2)
: Message Packet
(Set value: Available, Not Available)
: FTP
(Set value: Available, Not Available)
: Shutdown
(Set value: Available, Not Available)
Off : Do not use Relay Alarm.
Ⅵ Alarm Out
For performing setting related to output during
an alarm activation.
3
OUT1/OUT2
On : Output Value
(Set value: ON, OFF)
: Pattern
(Set value: Level, Momentum)
: Momentum Interval
(Set value: 1 to 5000 milliseconds)
Off : Do not output alarm.
Notes
● Set output settings according to settings of
the device for which alarm output is sent to.
● When alarm setting is complete, always
check to ensure that the alarm is functioning
correctly.
C205_p79-86 05.6.28, 2:26 PM 81