JVC VN-C205 - Manual (Page 19)

19
● Alarm Output Terminal
Connect this terminal to alarm devices such
as an annunciator, indicator, lamp or buzzer.
Output Requirements
• Equivalent to NPN open collector output (Set
output logic using the controller)
• Allowed applied voltage: DC12V and below
• Allowed input current: 50 mA
• Momentary output: 1 to 5000ms (Set duration
using the controller)
IN R
DC 12 V
GND
VN-C205
OUT
Terminal
Alarm Device
Connection
Example
(Alarm Output
Equivalent Circuit)
Grounding
Terminal
Caution
Connect the grounding terminal of VN-C205
to the GND terminal of the alarm device.
Ⅵ Inserting the CF card
Eject Button
Bac
k
Insert CF card in the direction as indicated
in the diagram
• Press once if the eject button is protruding
• Insert the CF card all the way until you hear a
"click" sound
* When removing the card, ensure that the power
of the camera is turned off before pressing the
eject button.
• San Disk (Industrial)
128MB (SDCFBI-128-201-80)
256MB (SDCFBI-256-201-80)
512MB (SDCFBI-512-201-80)
1024MB (SDCFBI-1024-201-80)
C205_p2-26 05.7.4, 0:58 PM 19