JVC VN-C205 - Manual (Page 23)

23
1.
Connection for Adjustment of the
Camera
The MONITOR terminal is used when mak-
ing various adjustments to the camera at
installation.
The power to the camera body must be ON
when adjustments are performed.
Setting
switch
IRIS LEVEL
Volume
Adjustment
button
75Ω
termination
disconnected
Monitor TV
2. Adjusting the Lens and Camera
Angle
Camera angle, zoom and focus are
adjusted.
● Horizontal rotation
(adjustable range: 120°)
1
Loosen the horizontal LOCK screw.
2 Holding the both tilt lock screws, rotate
horizontally.
3
Tighten the horizontal LOCK screw.
● Vertical rotation
(adjustable range: +80°, –50°)
1
Loosen the tilt lock screws.
2
Holding the rotation levers, rotate
vertically.
3
Tighten the tilt lock screws.
● Image inclination
(adjustable range: ±15°)
Manipulate the rotation levers to adjust
the inclination of the image.
● Adjusting the iris level
This adjustment only needs to be made
when required.(
੬ page 10)
Variable range 120°
Tilt lock
screws
Horizontal
Lock screw
Vertical rotation
3. Adjustment of the camera’s angle of view
FOCUS ADJ. switch
(
੬ page 11)
Rotation levers
Focus ring
Focal length
adjustment ring
IRIS LEVEL
C205_p2-26 05.7.4, 0:58 PM 23