JVC VN-C205 - Manual (Page 40)

40
2-4 Other Settings Using the "VN-C205U Setup Tool" (4. Alarm Setting)
Alarm Input
• When there is an input of signals to the alarm input terminal on the ceiling mount.
(
☞
Page 18 "Alarm Input Terminal")
• When motion is detected. (
☞
Page 38 "Motion Detection Setting")
Operation when an alarm input is activated
• Output signals are sent from the alarm output terminal on the ceiling mount.
(
☞
Page 19 "Alarm Output Terminal")
• Alarm packets are sent to the PC. (
☞
Page 42 "Message Packet")
• Images are uploaded to the FTP server. (
☞
Page 50 "FTP Client Setting").
• Quits all operations. (
☞
Page 42 "Shutdown")
1.
Start up the "VN-C205U Setup Tool" and select [Alarm].
This section describes procedures for alarm setting.
Settings (Step 2 Network Settings)
2
3
1
4
C205_p27-45 05.6.28, 11:45 AM 40