JVC VN-C205 - Manual (Page 60)

60
Ⅵ Image Quality Setting
Item Function/Set Value
Set the maximum transmission control.
Setting of compression level is possible when this is set to "OFF",
and images will be sent out at the specified compression level.
The smaller the value, the lower the compression level and hence
a higher image quality. However, data volume will also increase.
Set Value: 1 to 7
Setting of bit rate is possible when this is set to "ON", and the
compression level of images will be automatically adjusted ac-
cording to the specified bit rate before they are sent out.
Set value: 32 kbps to 8 Mbps
Initial Value
OFF
2
—
Distribution Control
OFF
ON
Operations (Step 3 Setting Using the V.Networks Controller)
Note
• It will be necessary to establish connection again upon
setting to enable display at the correct frame rate.
The "V.Networks Controller" can be used to perform image quality settings such as
compression level and white balance.
1.
Select [Setting] and [Quality].
2.
Change the set values.
3-5 Image Quality Setting
* When the [Distribution control ON] is selected,
the left screen will be displayed.
When setting is complete, click .
C205_p56-p65 05.6.27, 11:26 AM 60