JVC VN-C205 - Manual (Page 21)

21
6.
Wrap insulation tape around cables.
As shown in the diagram to the left, wrap
insulation tape around the input power cable
connection and BNC connector. Insert the
cables into the hole in the ceiling.
7.
Point the camera in the direction you
wish to capture.
Point the camera so that the Horizontal Lock
screw is facing the direction you wish to
capture. The camera can be adjusted ±60˚
horizontally to either side of the Horizontal
Lock screw.
8.
Mount the camera to the ceiling.
Use M4-sized (No. 8) screws/bolts or wood
screws (
␾4.1mm, 1/8 inches) to secure the
camera in four places when mounting to the
ceiling or wall.
Input power
cable
connection
BNC
Connector
Wrap with
tape
Wrap with
tape
6.
LAN cable
Alarm signal
cable
Mounting
holes
Mounting
holes
Horizontal
Lock screw
Screws
7.
8.
Note
Wrapping the wires with insulation tape
improves handling as well as reducing
interference.
Caution
Tighten all screws securely. Otherwise the
camera may come loose and fall.
C205_p2-26 05.7.4, 0:58 PM 21