Audio dubbing, Vhs deck only), Make connections – JVC HM-HDS1U User Manual
Page 80: Select vhs deck, Set input mode, Locate start point, Engage audio dubbing, Editing (cont.), Vhs audio dubbing
80
EN
;;;
;;;
;;;
yyy
yyy
yyy
DIGITPURE TECHNOLOGY
HM-HDS1
;;
;;
;;
yy
yy
yy
POWER
VHS Audio Dubbing
Audio dubbing replaces the normal audio sound of a previously
recorded tape with a new soundtrack. Use your recorder as the
recorder.
Audio Dubbing
(VHS deck only)
MAKE CONNECTIONS
1
Connect an audio component to the AUDIO IN L + R
connectors on the recorder´s front panel. *When
connecting monaural equipment, use only the
recorder´s AUDIO IN L connector.
SELECT VHS DECK
2
Press VHS (or S-VHS).
SET INPUT MODE
3
Press CH +/– to select depending on the connector
being used – “F-1” for the front panel input connectors,
or “L-1” for the rear panel input connectors.
LOCATE START POINT
4
Press PLAY to start playback of the tape in your
recorder, and press PAUSE when you find the point
where you want to start dubbing.
● Press C.RESET to change the counter display to
“0:00:00”.
ENGAGE AUDIO DUBBING
5
Press A. DUB.
● Your recorder enters the Audio Dubbing Pause mode.
( blinks, and light up on the front display
panel.)
Pre-recorded tape
Audio-dubbed tape
Normal audio track
Video/Hi-Fi audio
track
Audio cable
Audio component
(CD player etc.)
EDITING (cont.)