JVC HM-HDS1U - Manual (Page 36)

36
EN
Playback
with VHS
Navigation
SIMPLE OPERATION for VHS deck (cont.)
0001 DATE REC. CATEGORY CASSETTE #
[06/12/01 TUE ] 120M BLANK 87M (SP)
PLAY STOP MODIFY DELETE
SELECT OK END
SELECT WITH [ ∞523]
THEN PRESS [OK]
VHS NAVI
BLANK
INDEX NAVI
06/12/01 TUE 06/12/01 TUE 87min(SP)
[MISC.]
06/12/01 TUE 12:00PM–12:30PM 8CH SP 30min
NC
ST
Index : Small still
picture of the each
program. In this
case, there are two
registered programs
Recording Informa-
tion for the program
indicated by the
arrow
The VHS Navigation enables you to seach and select the
desired program recorded with the VHS deck very easily.
When you record a program with the VHS deck for more
than 5 minutes in SP mode (for more than 15 minutes in
EP mode) with “NAVIGATION” of “VHS SET UP 1” set to
“ON”, its information are registered in the VHS Naviga-
tion automatically.
When the first program is recorded on a cassette, the
VHS Navigation gives the register number to the cas-
sette. The VHS Navigation memorizes the cassette by the
number. You can confirm the register number of the
cassette when the cassette is loaded or ejected.
The VHS Navigation can register up to 2000 programs or
up tp 680 cassettes.
The following screen appears as the VHS Navigation screen when you press NAVI with the VHS deck selected. You
can move the arrow to select the desired position on the screen by pressing
@%#fi (or 253∞).
Guidance for
operations
The number appears
when the registered
cassette is loaded.
This date shows when
the loaded cassette is
registered.
Total time and BLANK
time of this cassette :
based on the
recording speed
currently selected
Operational
commands
NC This program has a little gap at the beginning.
ST This program has stereo sounds.
SA This program has SAP audio.
This program was recorded with Timer recording.
The Icons and their meanings
The icons : they show
the recording situation
for each program.