Rec link timer recording, Hdd deck only), Prepare the external equipment for timer recording – JVC HM-HDS1U User Manual
Page 63: Engage rec link mode
EN
63
REC LINK
Timer
Recording
(HDD deck only)
REC LINK enables the unit to record automatically from the
external equipment with timer function.
In REC LINK mode, when the signals come into the unit from
the external equipment, the unit automatically turns on and
starts recording on HDD deck.
PREPARE THE EXTERNAL
EQUIPMENT FOR TIMER
RECORDING
1
After timer recording is set, turn off the external
equipment connected to the unit.
ENGAGE REC LINK MODE
2
Press REC LINK for about two seconds. The REC LINK
button lights up.
● While the signals are coming into the unit, the REC
LINK button is blinking.
● If you want to change the recording speed, press
REC SPEED on the remote control before pressing
REC LINK.
To cancel REC LINK mode, press REC LINK again.
NOTES:
●
You need to connect the external equipment with AUX L-1
terminals on the rear panel.
●
When the recorder is in REC LINK mode, the recorder
changes the deck into VHS deck automatically. In this case,
you cannot use HDD deck until the REC LINK mode is
canceled.
1
2
3
4
5
6
7
8
9
0
2
1
4
3
>
<
1
2
–
+
;;;
;;;
yyy
yyy
DIGITPURE TECHNOLOGY
HM-HDS1
;;
;;
;;
yy
yy
yy
POWER
S-VHS ET
S-VHS
HDD
OK
MENU
REC LINK
CH
NAVI
STOP
PLAY
PAUSE
REC
REW
FEW
A. DUB
EJECT
VIDEO
PAUSE
S-VIDEO
(M) L – AUDIO – R
F - 1
REC SPEED
REC LINK