Turn on the recorder, Access main menu screen, Access vhs set up 2 screen – JVC HM-HDS1U User Manual
Page 62: Select auto sp=ep timer mode, Return to normal screen, Timer recording (cont.), Auto sp → ep timer, Vhs deck only), For example
62
EN
TIMER RECORDING (cont.)
Auto SP→EP Timer
(VHS deck only)
If, when recording in SP mode, there is not enough tape to record
the entire program, the recorder automatically switches to EP
mode to allow complete recording. This feature is especially
handy when recording a program of more than 2 hours in length.
Make sure you set “AUTO SP
→EP TIMER” to “ON” at the VHS
Mode Set screen before the timer recording starts.
Approximately 110 minutes
SP mode
Approximately 30 minutes
EP mode
Total 140 minutes
NOTES:
●
If you have programmed the recorder to timer-record 2 or
more programs, the second program and those thereafter may
not fit on the tape if you set the Auto SP
→
EP Timer mode to
“ON”. In this case, make sure the mode is not engaged, then
set the tape speed manually during timer programming.
●
In order to ensure that the recording fits on the tape, this
feature may leave a slight non-recorded section at the end of
the tape.
●
There may be some noise at the point on the tape where the
VCR switches from SP to EP mode.
●
The Auto SP
→
EP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will work with the
following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120.
For Example . . .
Recording a program of 140 minutes in length onto a 120-
minute tape
S-VHS MODE
ON
AUTO SP
=EP TIMER
OFF
HDD/VHS SET UP
INITIAL SET UP
FUNCTION SET UP
VHS SET UP 1
VHS SET UP 2
HDD SET UP
SELECT OK END
SELECT WITH [
∞523]
THEN PRESS [OK]
INDEX
MENU
TURN ON THE RECORDER
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS VHS SET UP 2
SCREEN
3
1) At the top of the
Main Menu screen,
move the arrow to
“HDD/VHS SET UP”
by pressing
@# (or
23), then press fi
(or
∞) or OK.
2) On the HDD/VHS
Set Up screen, move
the arrow to “VHS SET UP 2” by pressing
@# (or
23), then press fi (or ∞) or OK.
SELECT AUTO SP=EP
TIMER MODE
4
1) On the VHS Set Up
2 screen, move the
arrow to “AUTO
SP
=EP TIMER” by
pressing
%fi (or
5∞), then press OK.
2) Pressing
%fi (or
5∞) to select the
desired mode, then
press OK.
RETURN TO NORMAL
SCREEN
5
Press MENU.
S-VHS MODE
ON
AUTO SP
=EP TIMER
OFF
HDD/VHS SET UP
INITIAL SET UP
FUNCTION SET UP
VHS SET UP 1
VHS SET UP 2
HDD SET UP
SELECT OK END
SELECT WITH [
∞523]
THEN PRESS [OK]
INDEX
MENU
OFF
ON
1
2
3
4
5
6
7
8
9
0
2
1
4
3
>
<
1
2
–
+
;;;
;;;
yyy
yyy
DIGITPURE TECHNOLOGY
HM-HDS1
;;
;;
;;
yy
yy
yy
POWER
S-VHS ET
S-VHS
HDD
OK
MENU
REC LINK
CH
NAVI
STOP
PLAY
PAUSE
REC
REW
FEW
A. DUB
EJECT
VIDEO
PAUSE
S-VIDEO
(M) L – AUDIO – R
F - 1
POWER
POWER
OK
OK
MENU
MENU
OK