JVC HM-HDS1U - Manual (Page 11)

EN
11
Semi-Auto
You can change the Host Channel/D.S.T. /Time Zone setting
manually.
SET AUTO CLOCK TO ON
5
At the Clock Set screen,
press
# (or 3) or OK
repeatedly to move the
highlighted bar to
“AUTO CLOCK”, then
press
%fi (or 5∞) to set
to “ON”.
a– To select the Host
Channel — go to step
6
b– To select the D.S.T. mode — go to step 7
c– To select the Time Zone — go to step 8
NOTE:
The time that has been set previously will be erased
when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME
ZONE” setting is changed.
SELECT HOST CHANNEL
6
You can either select “AUTO” or enter a PBS channel
number.
Press
# (or 3) or OK repeatedly to move the high-
lighted bar to “HOST CH”, then press %fi (or 5∞) to
set to “AUTO” or the desired PBS channel number.
NOTE:
There are some PBS channels that do not transmit clock
setting data.
SELECT D.S.T. MODE
7
You have three choices:
a– Select “AUTO” and the adjustment to your
recorder's clock will be made according to the
incoming signal from the host channel.
b– Select “ON” and the adjustment will be made based
on the clock itself.
c– Select “OFF” if Daylight Saving Time does not apply
to you.
Press # (or 3) or OK repeatedly to move the high-
lighted bar to “D.S.T.” and press %fi (or 5∞) to select
the desired mode.
**AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the recorder’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 01
AUTO CLOCK:ON
HOST CH :AUTO (TV)
D.S.T. :AUTO
TIME ZONE :AUTO
SELECT WITH[ 5,∞] THEN[OK]
PRESS[MENU] TO END
CONTINUED ON NEXT PAGE
SELECT TIME ZONE
8
You can select the time zone automatically or manually.
Press
# (or 3) or OK repeatedly to move the high-
lighted bar to “TIME ZONE”, then press %fi (or 5∞) to
select “AUTO” or the desired time zone.
AUTO ATLANTIC
HAWAII EASTERN
ALASKA CENTRAL
PACIFIC MOUNTAIN
NOTE:
If an incorrect time is displayed by the Plug & Play
function, you may be receiving the clock setting data of
a PBS channel from an adjacent time zone or from an
incorrect PBS channel from a cable TV system. If you
selected
“AUTO” for the host channel in step 6, be sure
to select the correct time zone manually.
RETURN TO NORMAL
SCREEN
9
Press MENU. The Initial Set Up screen appears, then
press MENU again.
IMPORTANT
Turn the recorder off after performing the Semi-Auto Clock
Set procedure. “AUTO” will appear on the front display
panel when the clock is being set. The current time will
appear automatically when the clock is set.