JVC HM-HDS1U - Manual (Page 77)

EN
77
RETURN TO NORMAL SCREEN
7
Press MENU.
START PLAYER
8
Set the camcorder to its play mode.
NOTE:
If the camcorder is equipped with a superimpose/OSD
disable feature then set its superimpose or display
feature to OFF before pressing play.
START RECORDER
9
Set your recorder to its record mode.
● VHS deck ONLY
If you are using a Master Edit Control-equipped JVC
camcorder, it can put the recorder automatically into
Record mode. (Refer to camcorder's instruction
manual.)
● For HDD deck
NOTES:
● If you use an auxiliary input to connect a cable box or DBS
receiver, make sure that the correct AUX INPUT
(“COMPOSITE” or “S-VIDEO”) is selected after you have
finished editing (
੬
steps 5 – 7).
● For HDD deck, the recording pause takes effect only when
the recorder is recording on the HDD deck with the channel
set to “L-1”, “F-1”, or “DUB”. The recording pause is released
in 5 minutes automatically. Picture and sound may be
disturted at the point where the recording pause is released.
● Dubbing copyright guarded tape is not possible.
1 2 3
4 5 6
7 8 9
0
2
1
4
3
> <
1
2
– +
;;;
;;;
yyy
yyy DIGITPURE TECHNOLOGY
HM-HDS1
;;
;;
;;
yy
yy
yy
POWER
S-VHS ET
S-VHS HDD
OK
MENU
REC LINK
CH
NAVI
STOP PLAY PAUSE REC
REW FEW
A. DUB
EJECT
VIDEO
PAUSE
S-VIDEO
(M) L – AUDIO – R
F - 1
MENU
MENU
CH+/
–
OK
CH+/–
HDD
HDD
VHS POWER
POWER
OK
OK
S-VHS
To enter recording pause, press and hold REC and
press PAUSE on the remote control. To resume
recording, press and hold REC and press PLAY on the
remote control.