JVC HM-HDS1U - Manual (Page 72)

72
EN
EDITING (cont.)
You can dub selected scenes on a tape, starting and stopping
wherever you wish.
TURN ON THE RECORDER
1
Press POWER.
PREPARE HDD DECK FOR
DUBBING
2
1) Press HDD and select the program to be dubbed.
You can select the program by HDD Navigation.
2) Press CH +/– to set the channel other than “DUB”.
LOCATE START POINT
3
1) Select the point where you want to start dubbing by
pressing PLAY, FF, REW.
2) Press REW a little, then press PLAY to start playback.
3) Press PAUSE to pause playback before that point a
little.
PREPARE VHS DECK FOR
DUBBING
4
1) Press VHS (or S-VHS) and load a recordable cassette.
2) Press CH +/– to set the channel “DUB”.
3) Press REC SPEED to select recording speed.
4) Select the point where you want to start recording by
pressing PLAY, FF, REW, STOP.
START DUBBING
5
1) Press HDD and PLAY to start playback.
2) Press VHS and REC (REC and PLAY on the remote
control) to start dubbing.
END DUBBING
6
Press STOP. Then press HDD and press STOP.
Normal
Dubbing
(from HDD to VHS)
NOTES:
● There may be a discrepancy of several seconds between
where you intend editing to start, and where it actually starts.
● The superimposed indication during the operation or dubbing
is not recorded.
1 2 3
4 5 6
7 8 9
0
2
1
4
3
> <
1
2
– +
;;; ;;; yyy yyy DIGITPURE TECHNOLOGY
HM-HDS1
;; ;;
;;
yy yy
yy
POWER
S-VHS ET
S-VHS HDD
OK
MENU
REC LINK
CH
NAVI
STOP PLAY PAUSE REC
REW FEW
A. DUB
EJECT
VIDEO
PAUSE
S-VIDEO
(M) L – AUDIO – R
F - 1
POWER
PAUSE
PLAY
PLAY S-VHS
REW
FF
FF REW
POWER
REC
REC SPEED
CH+/
–
STOP PAUSE
CH+/–
STOP
HDD
HDD
VHS
REC