IBM 12.1(22)EA6 - Manual (Page 356)

19-6
Cisco Systems Intelligent Gigabit Ethernet Switch Modules for the IBM BladeCenter, Software Configuration Guide
24R9746
Chapter 19 Configuring RMON
Displaying RMON Status
To disable the collection of group Ethernet statistics, use the no rmon collection stats index interface
configuration command.
Displaying RMON Status
To display the RMON status, use one or more of the privileged EXEC commands in Table 19-1 :
For information about the fields in these displays, see the Cisco IOS Configuration Fundamentals
Command Reference for Cisco IOS Release 12.1.
Step 6 show rmon statistics Display the contents of the switch statistics table.
Step 7 copy running-config startup-config (Optional) Save your entries in the configuration file.
Command Purpose
Table 19-1 Commands for Displaying RMON Status
Command Purpose
show rmon Displays general RMON statistics.
show rmon alarms Displays the RMON alarm table.
show rmon events Displays the RMON event table.
show rmon history Displays the RMON history table.
show rmon statistics Displays the RMON statistics table.