IBM Print System QMS 1725E - Manual (Page 65)

Configuring the Network
4-13 Connecting to an Ethernet Network
TCP/IP
1 If necessary, in the Administration/Communications/Network
2/CrownNet/TCPIP/Internet Address menu, enter the
printer’s Internet address.
The factory default Internet address is 161.033.128.024.
2 If necessary, in the Administration/Communications/Network
2/CrownNet/TCPIP/Default Router menu enter the Internet
address of the default router.
The factory default router address is 000.000.000.000.
3 If necessary, in the Administration/Communications/Network
2/CrownNet/TCPIP/Subnet Mask menu enter the printer’s
subnet mask.
The default subnet mask is 000.000.000.000. This setting
provides automatic sensing of gateways. If you identify a
subnet mask, automatic sensing is disabled.
4 Continue with “Configuring the Network.”
Configuring the Network
EtherTalk
1 With the Macintosh running, from the Apple menu, open the
Chooser.
2 Click the LaserWriter icon.
3 If your network has more than one zone, click the name of
the default zone.
The printer name is automatically displayed in the default
zone.
4 Select the name of the printer.