IBM Print System QMS 1725E - Manual (Page 61)

Installing the Software
4-9 Connecting to an Ethernet Network
10 If you’re using SNMP to manage your network using SunNet
Manager, copy the appropriate files to the SunNet Manager
agents directory. See your SunNet Manager documentation
for more information.
11 Update the printer’s Internet name and address in the
/etc/hosts file.
12 Run the QMS addprt utility by typing
addprt
↵
13 Follow the instructions on the screen.
14 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
15 Skip to “Configuring the Interface,” later in this chapter.
Windows
1 With the PC on and Windows running, insert the disk con-
taining the CrownAdmin software for Windows in the disk
drive.
2 From the File menu in Program Manager choose Run.
» Note: You can’t install the utilities by copying files from the disks. You
must run the installation program.
3 In the Run dialog box, type
x:setup
↵
where x is the name of the drive in which you inserted the
Utilities disk (for example, a:setup
↵
) and choose OK.
4 When prompted, specify the directory in which to install the
utilities.
5 Follow the instructions on the screen.
6 When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
7 Continue with the next section, “Configuring the Interface.”