IBM Print System QMS 1725E - Manual (Page 54)

Introduction
QMS 1725E Print System Getting Started 4-2
Introduction
The Ethernet port, also referred to as the QMS CrownNet network
interface, is a combination of hardware and host software that allows
your QMS 1725E printer to be connected to an Ethernet network that
supports the following:
Connecting to the Ethernet port consists of four steps:
n Connecting to the network
n Installing the software
n Configuring the interface
n Configuring the network
The rest of this chapter explains these steps in more detail.
Connecting to the Network
The Ethernet port supports two types of connections:
n
Thin-wire Ethernet (10Base2, BNC connector)
n
Twisted-pair Ethernet (10BaseT, RJ45 connector)
Operating System Protocol
AppleTalk EtherTalk
LAN Manager/LAN Server NetBIOS/NetBEUI
NetWare IPX/SPX
TCP/IP TCP/IP