IBM Print System QMS 1725E - Manual (Page 48)

Testing
Communication
QMS 1725E Print System Getting Started 3-8
1 Press the printer control panel Online/Offline key.
The indicator goes out and the message window displays
IDLE
2 Press the Menu key to enter the top-level menu.
3 Press the Next key one or more times until the message win-
dow displays
OPERATOR CONTROL
ADMINISTRATION
4 Press the Select key to enter the Administration menu.
5 Press the Next key one or more times until the message win-
dow displays
ADMINISTRATION
COMMUNICATIONS
6 Press the Select key to enter the Communications menu.
7 Press the Next key one or more times until the message win-
dow displays
COMMUNICATIONS
SERIAL
8 Press the Select key to enter the Serial menu.
9 Press the Next key one or more times until the message win-
dow displays
SERIAL
BAUD RATE
10 Press the Select key to enter the Baud Rate menu.
The message window displays the currently selected baud rate:
*9600 BAUD
» Note: The asterisk * denotes the selection in the menu that is currently
active.
11 Press the Next key to cycle through the list of baud rates.