Intel Extensible Firmware Interface User Manual
Page 1037
Alphabetic Function Lists
Version 1.10
12/01/02
K-27
Table K-2. Functions Listed Alphabetically within a Service or Protocol
(continued)
Service or Protocol
Function
Function Description
Used to allocate and build a device path node for a
SCSI device on a SCSI channel.
Used to retrieve the list of legal Target IDs for the
SCSI devices on a SCSI channel.
Used to translate a device path node to a Target ID
and LUN.
Sends a SCSI Request Packet to a SCSI device that
is connected to the SCSI channel.
Resets the SCSI channel.
Resets a SCSI device that is connected to the SCSI
channel.
Reads the status of the control bits on a serial device.
Receives a buffer of characters from a serial device.
Resets the hardware device.
Sets communication parameters for a serial device.
Sets the control bits on a serial device.
Sends a buffer of characters to a serial device.
Opens the volume for file I/O access.
Reads a keystroke from a simple input device.
Resets a simple input device.
Reads the current interrupt status and recycled
transmit buffer status from the network interface.
Resets the network adapter and allocates the transmit
and receive buffers required by the network interface;
also optionally allows space for additional transmit
and receive buffers to be allocated
Allows a multicast IP address to be mapped to a
multicast HW MAC address.
Allows read and writes to the NVRAM device
attached to a network interface.
Receives a packet from the network interface.
Enables and disables the receive filters for the
network interface and, if supported, manages the
filtered multicast HW MAC address list
Resets the network adapter, and reinitializes it with
the parameters that were provided in the previous call
to
continued