Intel Extensible Firmware Interface - Manual (Page 1023)

Alphabetic Function Lists
Version 1.10 12/01/02 K-13
Table K-1. Functions Listed in Alphabetic Order (continued)
Function Name Service or Protocol Subservice Function Description
Reset UNDI Commands This command resets the network
adapter and reinitializes the UNDI
with the same parameters
provided in the
Initialize()
command.
Reset USB Host Controller
Protocol Software reset of USB.
ResetChannel SCSI Passthru
Protocol
Resets the SCSI channel.
ResetSystem Runtime Services Miscellaneous
Services
Resets the entire platform.
ResetTarget SCSI Passthru
Protocol Resets a SCSI device that is
connected to the SCSI channel.
RestoreTPL Boot Services Event Services Restores/lowers the task priority
level.
RunDiagnostics EFI Driver
Diagnostics Protocol
Runs diagnostics on a controller.
SetAttribute Simple Text Output
Protocol Sets the foreground and
background color of the text that is
output.
SetAttributes PCI Root Bridge I/O
Protocol Sets attributes for a resource
range on a PCI root bridge.
SetAttributes Serial I/O Protocol Sets communication parameters
for a serial device.
SetBarAttributes PCI I/O Protocol Sets the attributes for a range of a
BAR on a PCI controller.
SetControl Serial I/O Protocol Sets the control bits on a serial
device.
SetCursorPosition Simple Text Output
Protocol Sets the current cursor position.
SetInfo File System Protocol Sets the requested file
information.
SetIpFilter PXE Base Code
Protocol Updates the IP receive filters of a
network device and enables
software filtering.
SetMem Boot Services Miscellaneous
Services Fills a buffer with a specified
value.
continued