Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 98)

4-60 PRO/100 LAN+Modem PC Card User’s Guide
I can't hear the modem
A. Be sure the computer speaker is enabled in the computer’s CMOS
setup utility.
B. To enable modem sound, include the following AT command in any
communications package modem initialization string:
M1
or as a standalone command preceded by the letters AT:
ATM1
The PRO/100 PC Card does not have a built-in speaker. It relies on the
PC Card software to direct signals to the computer’s speaker. A few
computers do not properly direct the PRO/100 PC Card audio to the
system speaker. The modem will connect and operate normally, but no
sound will be heard. On some PCs you can set the speaker on or off or
change volume levels with a keyboard sequence. See your computer
documentation.
Computer-Specific Application Notes
(Windows 3.x)
If you are using Card and Socket Services and are experiencing problems,
find your computer in the list below and review the information provided.
The examples of Card and Socket Services driver stacks and
EMM386.EXE lines have been verified and are known to be reliable.
Sample Card and Socket Services configuration files and their known
problems are also supplied.
Ambra
DEVICE=C:\DOS\EMM386.EXE NOEMS X=D000-DCFF
DEVICE=C:\PCM3\CNFIGNAM.EXE /DEFAULT
DEVICE=C:\PCM3\PCMSS.EXE
DEVICE=C:\PCM3\PCMCS.EXE
DEVICE=C:\PCM3\PCMRMAN.SYS
DEVICE=C:\PCM3\PCMSCD.EXE
REM DEVICE=C:\PCM3\PCMATA.SYS
REM DEVICE=C:\PCM3\PCMFFCS.EXE