Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 86)

4-48 PRO/100 LAN+Modem PC Card User’s Guide
The card is unreadable, possible memory conflict
The Card Information Structure (CIS) of the PC Card was unreadable.
This could be a result of failure to exclude the selected memory range
from the memory managers loaded on the machine. Either exclude a 8K
memory range, select a memory range that has already been excluded, or
include the NOCHECK keyword in the configuration file.
Please specify a different interrupt for the modem
The LAN adapter and modem cannot be configured for the same
interrupt. Either select a different modem interrupt (using the COMIRQ
keyword or a different COM port value), or select a different LAN
interrupt (using the INTERRUPT keyword).
The COMBASE keyword is required in this configuration
If the COMIRQ keyword has been specified, but COM1, COM2, COM3,
or COM4 has NOT been specified, the COMBASE keyword must be
specified with an appropriate value.
The COMIRQ keyword is required in this configuration
If the COMBASE keyword has been specified, but COM1, COM2,
COM3, or COM4 has NOT been specified, the COMIRQ keyword must
be specified with an appropriate value.
The Network Controller is not responding
A PRO/100 PC Card was detected, but subsequent attempts to initialize
the network controller failed. Try setting the WORDSIZE parameter to 8.
Please specify a decimal number for the INTERRUPT keyword
This message applies only to the NDIS 2.0 Driver. The value specified
under the INTERRUPT keyword in the PROTOCOL.INI file must be a
decimal not a hexadecimal number.