Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 53)

Windows 3.x/MS-DOS Installation 4-15
12 Continue your server or workstation startup as instructed in the
PC/TCP documentation.
ODI with FTP Software PC/TCP and NetWare
If you need to run Novell NetWare concurrently with FTP PC/TCP,
proceed as follows:
1 Run the Installation Program from Intel Disk 1, Installation Disk.
2 Choose FTP PC/TCP from the Select Network Operating System
screen.
3 Follow the prompts to complete the Intel segment of the installa-
tion.
4 Install PC/TCP according to the instructions in your FTP PC/TCP
manual.
5 (This step is not required for PC/TCP versions 2.10 and later.)
Using a text editor, add the following lines to your CONFIG.SYS
file:
DEVICE=[ PATH]IPCUST.SYS
DEVICE=[ PATH]IFCUST.SYS
where [path] is the drive and directory specified in the PC/TCP
installation.
6 Copy NET.CFG from the C:\INTEL\M16B directory and the files
LSL.COM and M16BODI.COM from the root directory of the
Intel Network Drivers Disk to the PC/TCP directory created in the
PC/TCP install procedure.
7 To start the workstation, load the software as follows:
LSL
M16BODI
IPXODI
ODIPKT
(USE THE VERSION SUPPLIED WITH PC/TCP)
ETHDRV
VLM
8 Change to the network drive (usually F:\LOGIN).
9 Log in to the network.