Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 148)

6-24 PRO/100 LAN+Modem PC Card User’s Guide
+MS=? Displays range of acceptable values for each
subparameter
Specifies the preferred modulation to be used in
originating or answering a connection. The
subparameter is an unquoted string
of characters. If the parameter is
specified, the other subparameters will revert to
factory defaults. If is omitted, any
unspecified parameters will keep their current
values (for example, AT+MS=,0 or
AT+MS=,,,2400).
Values accepted for are the following:
B103 Bell 103 (300bps)
B212 Bell 212A (1200bps)
V21 ITU-T V.21 (300bps)
V22 ITU-T V.22 (1200bps)
V22B ITU-T V.22bis (2400bps)
V23C ITU-T V.23 with constant carrier (1200/75 or 75/
1200bps)
V32 ITU-T V.32 (4800 or 9600bps)
V32B ITU-T V.32bis (4800 - 19200bps)
V34 ITU-T V.34 (2400 - 33600bps)
K56 (default) Lucent/Rockwell K56flex (32000 - 56000bps)
Enables or disables negotiation of an alternative
if the preferred modulation is not
available.
Values accepted for are the following:
0 Disabled. Modem will disconnect if it is unable to
negotiate a connection with the specified .
1 Enabled (default). If the specified is unavail-
able, modem will attempt to negotiate an alternative
carrier as appropriate.