Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 46)

4-8 PRO/100 LAN+Modem PC Card User’s Guide
NDIS DRIVER FILE: M16BNDIS.EXE
NDIS DRIVER NAME: INTEL$
b. for PATHWORKS 5.1:
DRIVER FILE: A:\M16BNDIS.EXE
PROTOCOL.INI STUB: A:\DEC\PROTOCOL.INI
c. for PATHWORKS 6.0:
DRIVER FILE: A:\M16BNDIS.EXE
PROTOCOL.INI STUB: A:\DEC\PROTOCOL.INI
Skip the Additional Files section.
12 Insert Intel Disk 2, Network Drivers Disk when prompted.
13 Enter your node information when prompted.
14 Save the PROTOCOL.INI file with the default settings.
At this point, the SETUP program will try to connect to the
DECnet server. Once connected, the SETUP program will map a
logical drive to your system service.
15 Highlight the logical drive mapped by the SETUP program, and
press Enter to run PWSETUP.
16 Press Enter to confirm the Software Destination C:\PW.
17 Choose Express (or Custom if you have a lot of prior installation
experience).
18 Select an appropriate Workstation Template, or create one.
19 Under Network Adapter Information, choose other network
adapter, with NDIS enabled, and enter the following information:
IN THE NON-SUPPORTED NETWORK ADAPTER WINDOW
DRIVER FILE: A:\M16BNDIS.EXE
PROTOCOL.INI STUB: A:\DEC\PROTOCOL.INI
Skip the Additional Files section and ensure Ethernet box is
enabled.
20 Insert Intel Disk 2, Network Drivers Disk when prompted.
21 In the Network Adapter Information window, select M16BNDIS
Unsupported Network Adapter with NDIS Box enabled