Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 115)

Utilities and Applications 5-11
2 Click Preferences.
3 In the Connection window under Connection Type check all
settings for accuracy.
a Winsock: (Default WINSOCK).
b Connect using:
c Phone #:
d Port:
e Port speed:
f Dial type:
Modify any of the above settings are not valid.
4 To modify the modem type, click Define Modem, highlight Intel as
manufacturer and the EtherExpress PRO/100 LAN+Modem PC
Card model.
Note
The default initialization string should suffice. To modify your
initialization string, click Define Modem and enter the new
initialization string in the Initialization section.
5 Click OK to save configuration and exit.
LapLink version 6.0
To set up the Intel modem or modify the present configuration:
1 In the Control Panel, click the Modem icon to access the Port Setup
window.
2 In the Port Setup Screen.
a Click the communications port that corresponds to the one
assigned to the modem.
b Select Modem under Type.