Intel LAN+Modem56 PC Card PRO/100 - Manual (Page 122)

5-18 PRO/100 LAN+Modem PC Card User’s Guide
g Select M16BNDIS.EXE Real Mode (for all Intel adapters), then
click OK
h Remove the IPX/SPX Compatible Transport with NetBIOS
driver only, click Close, then OK
i In the Windows Setup screen click Yes to All, “...to replace all
later files with the version you are installing now...” Windows
disks #7 and 8 are required to complete the installation
j Confirm that the Local Network is functional and that you can
access the modem using the TERMINAL program in Accesso-
ries Group before proceeding to the next step.
2 Copy the M16BRAS1.INF file from the \scripts directory on disk 2
to the c:\windows\system directory.
3 Exit Windows and go to the C:\Windows\System sub-directory.
Back up the original MODEM.INF with the following command:
COPY MODEM.INF MODEM.BAK
4 Append the Intel M16BRAS1.INF file to the end of the
MODEM.INF file. To do this, issue the following commands:
COPY MODEM.INF+M16BRAS1.INF MODEM.NEW
COPY MODEM.NEW MODEM.INF
5 Modify the new MODEM.INF in the [Intel EtherExpress PRO/
100 Lan+Modem PC Card] section, edit the following lines:
MAXCARRIERBPS= 56000
MAXCONNECTBPS= 56000
6 Save the file and exit the editor
7 Double-click the Windows Network Setup icon
8 Install Remote Access Service in Windows for Workgroups
a Double-click the Network Setup icon, then the RASSTART icon
b Click Install to continue
c In the Remote Access screen click Yes to All, “...to replace all
later files with the version you are installing now, press Yes to