beautypg.com

Windows 3.x network driver parameters, Windows 3.x network driver parameters -37, Ftp software pc/tcp – Intel LAN+Modem56 PC Card PRO/100 User Manual

Page 49

background image

Windows 3.x/MS-DOS Installation 4-11

DEVICE = C:\LW\IFCUST.SYS

6 Create a directory called NDIS on your hard disk, by typing:

MD NDIS

7 At the DOS prompt, copy M16BNDIS.EXE from the

C:\INTEL\M16B directory on your hard disk and the file

PROTOCOL.FTP from the \NDIS directory on the Intel Network

Drivers Disk to the \NDIS directory you created in Step 6.

8 Use a text editor to modify the PROTOCOL.FTP file to match the

keywords and values in the sample PROTOCOL.INI file in the

\INTEL\M16B directory.

9 Copy all the files from the \NDIS directory on the FTP Unsup-

ported Software Disk A to the \NDIS directory created in Step 6.

10 Reboot the PC.
11 Change to the \NDIS directory and run NETBIND.EXE.
12 Run LW.EXE.

FTP Software PC/TCP

Packet, NDIS 2.0, and ODI Drivers

The PC/TCP Generic Ethernet Kernel ETHDRV.EXE can be installed

using Intel’s Packet, ODI, or NDIS drivers. PC/TCP can also be used

concurrently with NetWare. For information on which driver is appropri-

ate for your network environment, see the FTP PC/TCP documentation.

For environments using values other than those set by the Intel Installa-

tion Program, see the heading Windows 3.x Network Driver Parameters

later in this chapter.

FTP PC/TCP 3.X with OnNet 1.1 and Windows for
Workgroups 3.11

1 Run the Installation Program from Intel Disk 1, Installation Disk.
2 From the Select Network Operating System screen, choose Win-

dows for Workgroups then FTP PC/TCP 3.x.

3 Follow the prompts to complete the Intel segment of the installa-

tion.

4 Run the PC/TCP installation program OnNet 1.1