IBM Tivoli and Cisco - Manual (Page 372)

354 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
Example of SNMP configuration:
snmp-server community public RW
snmp-server community c3750_read RO
snmp-server location Matanzas
snmp-server contact Admin
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification
snmp-server host 192.168.9.51 public mac-notification snmp
7.3 Conclusion
In this chapter we presented the essential steps to build and configure a Network
Admission Control solution for both NAC Framework and NAC Appliance
approaches. We covered the installation and configuration for required client and
server components and the router and switch configuration.
At this point we have finished the setup of the basic compliance and network
enforcement subsystem. The configuration of the remediation subsystem is
covered in Chapter 8, “Remediation subsystem implementation” on page 355.