IBM Tivoli and Cisco - Manual (Page 332)

314 Building a Network Access Control Solution with IBM Tivoli and Cisco Systems
and non-trusted networks. The
main subnet
is added by default. For each
managed network include the
IP Address
and
subnet mask VLAN ID
, as
shown in Figure 7-82. Click Add Managed Subnet.
Figure 7-82 Managed subnets
12.Select Advanced
→
VLAN Mapping.
13.Check the Enable VLAN Mapping box. Click Update. The screen will refresh
and stay the same. Enter the VLAN ID for the untrusted network VLAN and
the VLAN ID for the trusted network VLAN. Add a description if desired.